XL-8062 FT3 Photoelectric Converter

The XL-8062, as a digital substation protocol (FT3) communication protocol conversion device, can convert data signals from the 60044-8 (FT3) interface into frame data signals of commonly used Ethernet interfaces. It features an FT3 input interface and an IEC61850 digital output interface. It is capable of capturing FT3 packets and, in conjunction with software, performing recording, waveform analysis, and effective value harmonic analysis.

Product Description

Product Introduction

                                    

XL-8062 as a digital substation protocol (FT3) communication protocol conversion device, capable of converting data signals from the 60044-8 (FT3) interface into commonly used Ethernet interface frame data signals. It features an FT3 input interface and an IEC61850 digital output interface. It can capture FT3 packets and, in conjunction with software, perform recording, waveform analysis, and effective value harmonic analysis.

 

Main Functions

 

  • Automatically recognizes message transmission rates of 2.5Mbps, 5Mbps, and 10Mbps in FT3 synchronous transmission mode;
  • Automatically recognizes message transmission rates of 2Mbps, 4Mbps, 6Mbps, and 8Mbps in FT3 asynchronous transmission mode;
  • Automatically determines whether the received FT3 message format is standard FT3, State Grid FT3, or FT3 as specified in the DL/T282-2012 protocol;
  • Supports configuration of output messages in various Ethernet frame formats such as IPX and IEC61850-9-2(LE); (output format is fixed to one of these at factory configuration).
  • The acquired FT3 frame format data is complete and accurate, with hardware timestamp;
  • Good real-time performance, with delay from received FT3 frame header to output Ethernet frame header not exceeding 200μs.

 

Technical Specifications

 

  • Hardware timestamp accuracy: <200ns
  • Conversion delay: <200μs
  • Digital signal bandwidth: ≤30MHz
  • Temperature range: -20℃ to 70℃
  • Overall power consumption: ≤2W
  • Mean time between failures: >50000h

                      

Product Document

File Name

Update Time

Related Products

XL-8061 Multifunctional Clock Synchronization Device


The XL8061 multifunctional clock synchronization device provides PPS (pulse per second) and IRIG-B code timing signal outputs. It can achieve arbitrary conversion between PPS and IRIG-B codes, as well as forwarding and level conversion of digital signals.

XL-8062LE FT3 Photoelectric Converter


Supported encoding methods: Since a network transformer is used for isolation, only encoding methods that represent high and low levels by signal transitions are supported, such as Manchester encoding (verified to be normal), NRZI encoding (unable to verify), etc. The communication rate should be ≥5Mbps.

Product Inquiry

Our staff will contact you within 24 hours (working days)