XL-942AS American Standard Charging Pile On-site Characteristic Tester
The XL-943 electric vehicle AC charging pile on-site characteristic tester can simultaneously measure the output voltage, current, power, harmonics of the charging pile, as well as parameters such as the charging pile's energy error and clock error.
Product Description
Product Introduction
XL-942AS US Standard Charging Pile On-site Characteristic Tester Integrates functions such as on-site calibrator, power analyzer, oscilloscope recorder, EVCC simulator, vehicle DC interface circuit fault injection simulation box, etc. Together with the load, it meets the testing requirements for metering, interoperability testing, and protocol consistency testing, and satisfies the requirements for charging pile power consumption, efficiency, power factor, etc. During the testing process, waveforms are displayed graphically in real time, and the working status is clear at a glance. The device has a built-in WIFI module for wireless data transmission and can be remotely controlled via wireless devices such as tablets.
Main Features
- Built-in EVCC simulator, can directly start and control the charging pile;
- Built-in recording module with 4-channel recording function, supports global waveforms and event waveforms, automatically captures fault moments;
- Equipped with database function, test records are automatically generated and can be queried and exported by number, date, and other methods;
- Equipped with project editing function, selectable calibration projects, automatic process detection, automatic calculation of minimum time and minimum energy required for calibration, saving customers time, money, and effort;
- With load box, can perform calibration of working error and display error calibration points;
- Built-in WIFI module enables automatic data upload and remote control functions;
- Supports multiple power supply methods, built-in large capacity lithium battery, can work outdoors without power access for more than 8 hours under normal conditions, and the battery is designed to be removable.
Test Items
|
Project Set |
Project |
Reference |
|
Interoperability |
Charging Connection Ready |
SAEJ1772 |
|
Self-check Phase |
SAEJ1772 |
|
|
Charging Preparation Ready Test (including pre-charge) |
SAEJ1772 |
|
|
Charging Phase |
SAEJ1772 |
|
|
Normal Charging End |
SAEJ1772 |
|
|
Vehicle Abnormal Termination |
SAEJ1772 |
|
|
CP Disconnection |
SAEJ1772 |
|
|
Charging Connection Control Timing |
SAEJ1772 |
|
|
Pre-charging Insulation Test |
SAEJ1772 |
|
|
Output Current Error Test |
SAEJ1772 |
|
|
Output Voltage Error Test |
SAEJ1772 |
|
|
Output Overvoltage Test |
SAEJ1772 |
|
|
Current Measurement Error |
SAEJ1772 |
|
|
Voltage Measurement Error |
SAEJ1772 |
|
|
Emergency Stop Test - Communication Interruption |
SAEJ1772 |
|
|
Protective Conductor Continuity Check |
SAEJ1772 |
|
|
Control Guide Interruption Test |
SAEJ1772 |
|
|
Battery Overvoltage Protection Test |
SAEJ1772 |
|
|
Charging Current Control Delay Test |
SAEJ1772 |
|
|
Charging Current Decline Rate Test |
SAEJ1772 |
|
|
Load Sudden Drop Test |
SAEJ1772 |
|
|
Metering |
Working Error / Indication Error |
JJG1149 |
|
Protocol Consistency (Basic version does not have this function)
|
US and US Standard Consistency Test Item List Supported Total: 250 items Not Supported: 41 items |
DIN_70122 |
|
US and US Standard Consistency Test Item List Supported Total: 600 items ISO15118-4 Not Supported: 34 items ISO15118-5 Not Supported: 29 items |
ISO15118-4 ISO15118-5 |
|
|
Comprehensive Test Items (Basic version does not have this function) (This part is for laboratory testing items, which cannot be completed independently by this on-site device. It is recommended to purchase our US and US standard laboratory series) |
CP Disconnection |
SAEJ1772 |
|
PP Disconnection |
SAEJ1772 |
|
|
Insulation Fault |
SAEJ1772 |
|
|
Requirement for Pile-end to Ground Y Capacitor |
SAEJ1772 |
|
|
Current Measurement Error |
SAEJ1772 |
|
|
Voltage Measurement Error |
SAEJ1772 |
|
|
Current Setting Error |
SAEJ1772 |
|
|
Current Stop Rate |
SAEJ1772 |
|
|
Output Current Ripple |
SAEJ1772 |
|
|
No-load Regulation Rate and Ripple |
SAEJ1772 |
|
|
Output Overcurrent |
SAEJ1772 |
|
|
Surge |
SAEJ1772 |
|
|
DC Output Short Circuit Test |
SAEJ1772 |
|
|
Communication Interruption |
SAEJ1772 |
|
|
Over-temperature Detection |
SAEJ1772 |
|
|
Anti-backflow Detection |
SAEJ1772 |
|
|
Active Termination |
SAEJ1772 |
|
|
Output Overvoltage Test |
SAEJ1772 |
|
|
Pre-charge Detection |
SAEJ1772 |
|
|
Voltage Fluctuation Detection During Normal Charging |
SAEJ1772 |
|
|
Continuously Updating... |
||
Product Document
File Name
Update Time
Related Products
undefined
Product Inquiry
Phone:18926763142/0755-86660346
Fax: 0755-26470506
Address: 6th Floor, Building A, Huizhi R&D Center, Bao'an District, Shenzhen, Guangdong Province
Alibaba Store:https://szxlele.1688.com/
Power Source Meter New Website:http://gly.xl-ele.com
Xinglong Testing Company Website:http://www.xljc-ltd.com
Scan to enter the mini program
Scan to follow the official account
Scan to follow the Sohu account
Scan to follow the Baijia account
Scan to follow the Douyin account