XL-809DCT DC Distribution Network Current Sensor Calibration System
The current sensor calibration system integrates traditional equipment (components) into one unit, built-in with a mutual inductor calibrator, standard current sensor, and programmable DC high current source. It features a high degree of automation and meets the current mutual inductor verification regulations.
Product Description
Main Functions
- Realize error verification of DC current sensors.
- The current sensor verification system integrates traditional equipment (components), built-in mutual inductor calibrator, standard current sensor, and programmable DC high current source, with a high degree of automation, meeting the current mutual inductor verification regulations.
- All devices (components) within the device can be individually sent for inspection according to existing verification regulations.
- Equipped with primary current verification point monitoring instruments, capable of displaying primary current verification points.
- Large screen display with built-in touch screen, full Chinese operation prompts, easy operation, real-time display of measurement data, and statistical analysis.
- Can display the waveform of the sensor under verification in real time to monitor waveform distortion of the sensor being tested.
- Verification schemes can be freely edited as needed to achieve fully automatic verification.
- Reports can be generated based on customer-provided templates, which can be freely edited.
- This product has strong adaptability and scalability, supporting future upgrades.
Technical Specifications
|
Accuracy Level |
Level 0.05 |
|
Standard Current Input Range |
DC 0-0.4A |
|
Standard Measurement Range |
1%-100% In |
|
Small Signal Input Range Under Test |
0–10V |
|
Measurement Range Under Test |
1%-120% Un |
|
Standard Current Ranges |
0.0032A, 0.016A, 0.08A, 0.4A |
|
Small Signal Input Ranges Under Test |
|
|
Load Resistance Ranges |
20kΩ, 50kΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ |
|
Load Accuracy |
3% |
|
Output Range |
DC 0-600A |
|
Accuracy |
1%RD |
|
Ripple Factor |
Better than 0.5% FS + 10mVrms |
|
Capacity |
3kW |
|
Input Range |
DC 0-600A |
|
Standard Current Transformer Ratio |
600A: 0.4A |
|
Accuracy Level |
Level 0.02 |
|
Industrial Control Computer Parameters |
19 inches |
|
Processor: I5 |
|
|
4G Memory |
|
|
Operating Power Supply |
AC 220V±5% 50Hz |
|
Maximum Total Power Consumption |
≈3500VA |
|
Warm-up Time |
<15 minutes |
|
Weight |
Approximately 75kg |
|
Operating Temperature |
-5℃ to +40℃ |
|
Relative Humidity |
≤80% (no condensation or corrosive gases) |
Product Document
File Name
Update Time
Related Products
XL-809DPT DC Distribution Network Voltage Sensor Calibration System
Product Inquiry
Phone:18926763142/0755-86660346
Fax: 0755-26470506
Address: 6th Floor, Building A, Huizhi R&D Center, Bao'an District, Shenzhen, Guangdong Province
Alibaba Store:https://szxlele.1688.com/
Power Source Meter New Website:http://gly.xl-ele.com
Xinglong Testing Company Website:http://www.xljc-ltd.com
Scan to enter the mini program
Scan to follow the official account
Scan to follow the Sohu account
Scan to follow the Baijia account
Scan to follow the Douyin account