XL-804 Multi-channel Small Signal Analog Voltage Source

XL-804 Multi-channel Small Signal Analog Voltage Source

The XL-804 multi-channel small signal analog voltage source can output 8 channels of small voltage signals, capable of outputting DC, square wave, triangle wave, sine wave, power frequency harmonics from 2nd to 129th order, custom waveforms, and various types of waveform splicing outputs.

Product Inquiry
Related Products

Product Description

Product Introduction

XL-804 Multi-Channel Small Signal Analog Voltage Source Can output 8 channels of small voltage signals, capable of outputting DC, square wave, triangle wave, sine wave, power frequency 2nd to 129th harmonics, custom waveforms, various types of waveform splicing output, and other functions.

Main Functions

With the supporting operation software, users can easily control the source to output any desired waveform signals, such as:

  • Can output 0~10V DC;
  • Can output 0~7V AC;
  • Square wave output;
  • Triangle wave output;
  • Power frequency superimposed with up to 129th harmonic output;
  • Voltage small signal output from 0.001 to 5KHz;
  • AC output superimposed with DC component;
  • Manually drawn waveform output;
  • Supports waveform playback of recording files in COMTRADE format;
  • Supports single cycle waveform output and repeated output;
  • Supports formula input and generates waveform output, allowing up to 50 formula-generated waveforms to be spliced in chronological order into one waveform output.

Note: All the above output signals are analog small voltage signals with peak values less than or equal to 10V.

 

Technical Specifications

AC Small Voltage Output (8 channels)
Adjustment Resolution 0.01% RG
Stability Better than ±0.01% RG/1min
Distortion Better than 0.1% (non-capacitive load)
Output Power Rated 10mA per phase
Full Load Regulation Less than ±0.01% RG
Full Load Regulation Time Less than 1ms
Output Range 0~7V, rated 5V DC 0~10V
Accuracy Range 0~50mV (0.1% RD + 0.01% RG)
50~500mV (0.05% RD + 0.01% RG)
500~7000mV (0.01% RG)
Temperature Drift ±4 PPM/℃
Frequency
Each phase output frequency of XL-804 can be adjusted independently; the voltage and current (actually also small voltage signals) of the same phase have the same frequency:
Frequency Accuracy Hz
0.001~60Hz 0.00001
60~100Hz 0.02
100~1000Hz 0.5
1000~2000Hz 5
1000~5000Hz 50
Harmonics
Name Technical Specifications
Harmonic Waveform Distortion Better than 0.1%
Harmonic Accuracy Better than 0.2%
Other Parameters
Name Specification Range
Operating Voltage AC 220V±5% 50 Hz
Warm-up Time <15 minutes
Operating Temperature -10 ℃ to 55 ℃
Relative Humidity ≤85% Non-corrosive gases
Dimensions 455*285*195 (L*W*H)
Total Weight 9.5 Kg

Product Document

File Name

Update Time

Related Products

XL-8083 Small Analog Electric Energy Meter Calibrator

XL-8083 Small Analog Electric Energy Meter Calibrator

The XL-8083 small analog electric energy meter calibrator is a new generation high-precision measuring instrument using a 32-bit MCU + DSP processor. It can output high-precision voltage small signals with adjustable power frequency (40Hz to 65Hz), phase, and amplitude. It is suitable for power departments, metering departments, quality inspection departments, research institutions, universities, and R&D enterprises for debugging and calibrating digital electric energy meters, as well as debugging and energy calibration of high and low voltage primary and secondary integrated acquisition devices.
XL-901 DC Standard Meter

XL-901 DC Standard Meter

The XL-901 DC standard meter can be used for the measurement of DC voltage, current accuracy, power, and electric energy. It features a pulse output terminal for easy calibration by metering institutions and a pulse input terminal for detecting electric energy errors in DC energy meters.
XL-801R Dynamic Waveform Standard Electric Energy Meter

XL-801R Dynamic Waveform Standard Electric Energy Meter

The XL-801R dynamic waveform standard electric energy meter series can be used as an AC standard meter and harmonic standard meter, with options for single/three-phase measurement. The harmonic measurement range is from 2nd to 50th order, accuracy class 0.05, and harmonic accuracy class 0.2.
XL-803R Three-Phase Multifunction Standard Meter

XL-803R Three-Phase Multifunction Standard Meter

The XL803R three-phase multifunction standard meter can simultaneously measure parameters such as three-phase voltage, current, frequency, phase, active power, reactive power, apparent power, and can also measure waveform distortion and harmonics from 2nd to 50th order.
XL-824D AC/DC Standard Power Source

XL-824D AC/DC Standard Power Source

The XL-824D AC/DC standard source can serve as a three-phase AC standard power source, DC standard power source, DC standard voltmeter, and DC standard ammeter. It has an accuracy level of 0.1/0.05 and can be used for testing and calibration of various AC/DC indicating instruments, power frequency and digital instruments, energy meters, and multimeters. It is suitable for power departments, metrology departments, quality inspection departments, research institutions, universities, and enterprises engaged in the production and research of energy meters.
XL-3270 Programmable Wideband Current Source

XL-3270 Programmable Wideband Current Source

The XL-3270 Programmable Wideband AC Source (hereinafter referred to as XL-3270) can output single-phase AC and DC current. The current output can be sine wave, superimposed DC, DC, half-wave, and various harmonic superpositions. The frequency output range is DC-1.2kHz, suitable for occasions requiring complex power waveform signal output.
XL901A Series of DC Standard Electric Energy Meters with Dynamic Characteristics

XL901A Series of DC Standard Electric Energy Meters with Dynamic Characteristics

The XL901A DC standard electric energy meter with dynamic characteristics is designed according to the "JJG-842-2017 Electronic DC Meter Verification Regulations" and the "JJGXXXX-20XX DC Standard Electric Energy" (draft for approval).
XL-3003DZ-D Small Current Low Power Factor Standard Electric Energy Meter

XL-3003DZ-D Small Current Low Power Factor Standard Electric Energy Meter

The XL-3003DZ-D small current low power factor standard electric energy meter is suitable for power departments, enterprises, and research institutions in the power system that need to measure and verify the metering performance of small current low power factor. It is also suitable for other occasions requiring measurement and verification with a high-precision standard meter for small current low power factor. This device features high safety, ease of operation, a large touchscreen for control and display, and remote control capabilities.
XL-201 AC/DC Transient Standard Source

XL-201 AC/DC Transient Standard Source

The XL-201 AC/DC transient standard source is suitable for transient testing of analog input merging units in intelligent substations (digital substations). The transient source can output transient test waveform signals that comply with the State Grid Corporation enterprise standard: Q/GDW 11015-2013 "Analog Input Merging Unit Testing Specification." It can output transient high current and can be used in scenarios requiring transient performance testing of merging units, transformers, and similar equipment.
XL-833 Table Source Integrated Tester

XL-833 Table Source Integrated Tester

The XL-833 AC meter source integrated tester series products can be used for AC quantity detection and calibration. They are suitable for power departments, metrology departments, quality inspection departments, research institutions, higher education institutions, as well as enterprises engaged in the production and research of electric energy meters, distribution terminals, electricity management, load control, power quality, reactive power compensation, and other fields.
XL-8234 Four-Phase AC Power Source

XL-8234 Four-Phase AC Power Source

The XL-8234 four-phase AC power source is a new generation high-precision standard power source composed of a 1.2G MAC-based DSP, large-scale FPGA, high-speed high-precision DA, and high-fidelity power amplifier. It is suitable for power departments in power systems that require measurement, inspection, and high-precision standard signal sources for electrical measurement, thermal engineering, remote control, and dispatching. It is also suitable for other occasions that require high-precision standard signal sources for measurement and inspection.

Product Inquiry

Our staff will contact you within 24 hours (working days)
Submit

Phone:18926763142/0755-86660346
Fax: 0755-26470506
Address: 6th Floor, Building A, Huizhi R&D Center, Bao'an District, Shenzhen, Guangdong Province
Alibaba Store:https://szxlele.1688.com/
Power Source Meter New Website:http://gly.xl-ele.com
Xinglong Testing Company Website:http://www.xljc-ltd.com

Scan to enter the mini program

Scan to follow the official account

Scan to follow the Sohu account

Scan to follow the Baijia account

Scan to follow the Douyin account

300.cn

Shenzhen

SEO

Business License
%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home