XL-809PT3 Distribution Network Voltage Sensor Calibration System
The XL-809PT3 distribution network voltage sensor calibration system can perform fully automatic testing of voltage sensors with a grade of 0.2S and below, automatically generate test reports, and test 3 voltage sensors at a time. It has high work efficiency and is especially suitable for voltage sensor manufacturers and inspection agencies conducting batch testing.
Product Description
Product Introduction
XL-809PT3 Distribution Network Voltage Sensor Calibration System This system organically combines the calibrator, self-boosting standard voltage sensor, programmable adjustable power supply, and load box into a desktop distribution network voltage sensor calibration device. It can perform fully automatic testing of voltage sensors of 0.2S grade and below, automatically generate test reports, test three voltage sensors at once, and has high work efficiency. It is especially suitable for voltage sensor manufacturers and institutions conducting batch inspections.
Main Functions
- Realize the calibration of ratio error and phase error of distribution network voltage sensors (EVT).
- The voltage sensor calibration system integrates traditional equipment (components) and is equipped with a self-boosting standard voltage transformer and programmable adjustable power supply. It has a high degree of automation and the measurement method complies with current transformer calibration regulations.
- All equipment (components) in the device can be sent for inspection separately according to existing calibration regulations.
- Equipped with a primary voltage monitoring instrument that can display the primary voltage.
- Large screen display with built-in touchscreen, full Chinese operation prompts, easy operation, real-time display of measurement data, and statistical analysis.
- Can display the waveform of the sensor under calibration in real time to monitor waveform distortion of the transformer under test.
- Calibration schemes can be edited arbitrarily according to requirements to achieve fully automatic calibration.
- Can generate and print test reports based on customer-provided templates, which can be edited arbitrarily.
- This product has strong adaptability and scalability, supporting future upgrades.
Technical Specifications
| 1. Calibrator Technical Specifications | |
| Accuracy Level | Level 0.05 (ratio error <0.05%, phase error <2') |
| Input Range for Small Signal Under Test | 0~8.5V |
| Input Impedance Under Test | 200 MΩ |
| Standard Voltage Ranges | 20V, 100V |
| Small Signal Input Ranges Under Test | 0.0625V, 0.2V, 1V, 6.25V |
| Load Resistance Ranges | 20kΩ, 50kΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ |
| Load Accuracy | 1% |
| 2. Programmable Adjustable Power Supply Specifications | |
| Capacity | 500VA |
| Voltage Output Range | 0~150V AC (low range), 0~300V AC (high range) with automatic range switching |
| Output Frequency | 45~100Hz |
| Waveform Distortion T.H.D | 2% (pure resistive load) |
| Display Parameters | Voltage Vrms, Current Arms, Frequency Fre, Power Wattage, Power Factor PF |
| Measurement Accuracy | Voltage 0.5% FS + 5 digits |
| Current 0.5% FS + 5 digits | |
| Frequency 0.01% FS + 5 digits | |
| Power 0.5% FS + 5 digits | |
| 3. Self-boosting Standard Voltage Transformer Specifications | |
| Boosting Range | 0~10kV |
| Voltage Input Range | AC 0~250V |
| Standard Voltage Transformer Ratio | 10kV: 100V 10kV/√3: 100V/√3 |
| Frequency | 50Hz |
| Accuracy Level | Level 0.02S |
| Rated Load | 0.25VA (100V) / 0.07VA (100/√3) |
| Power Factor | 1 |
| Capacity | 200VA |
| 4. Other Specifications | |
| Industrial Computer Parameters | Display: 19-inch, resolution 1280*1024 |
| Processor: I5 4210U | |
| 4G Memory | |
| Solid State Drive: 120G | |
| Operating Power Supply Voltage Range | AC 220V ±5% 50Hz |
| Total Power Consumption | <1000VA |
| Warm-up Time | <15 minutes |
| Dimensions (L×W×H) | 700mm × 620mm × 1370mm |
| Weight | Approximately 60kg |
| Operating Temperature | -5℃ to +40℃ |
| Relative Humidity | ≤80% (no condensation or corrosive gases) |
Product Document
File Name
Update Time
Related Products
XL-809T Distribution Network AC Sensor Calibration Device
XL-809CT3 Distribution Network Current Sensor Calibration System
XL-809A Current Transformer Automatic Testing Device
Product Inquiry
Phone:18926763142/0755-86660346
Fax: 0755-26470506
Address: 6th Floor, Building A, Huizhi R&D Center, Bao'an District, Shenzhen, Guangdong Province
Alibaba Store:https://szxlele.1688.com/
Power Source Meter New Website:http://gly.xl-ele.com
Xinglong Testing Company Website:http://www.xljc-ltd.com
Scan to enter the mini program
Scan to follow the official account
Scan to follow the Sohu account
Scan to follow the Baijia account
Scan to follow the Douyin account