XL-3610T6 Micro Current Transformer Calibration System
The XL-3610T6 miniature current transformer calibration system product is designed in accordance with standards such as "Q/GDW11179.15-2015 Technical Specifications for Components Used in Electric Energy Meters: Current Transformers" and is used for the calibration of miniature current transformers for electric energy meters.
Product Description
Product Introduction
XL-3610T6 Micro Current Transformer Calibration System The product is designed according to the specifications such as "Q/GDW11179.15-2015 Technical Specification for Components Used in Electric Energy Meters: Current Transformers" and is used for calibrating micro current transformers for electric energy meters. The system consists of an electronic programmable AC/DC current source, a micro current transformer calibrator, and calibration system software. Its core adopts a dual-CPU architecture with powerful functions, using a 24-bit AD chip and 512 times oversampling technology to greatly expand bandwidth and improve measurement accuracy. At the same time, an FIR filter is used to improve dynamic range and signal-to-noise ratio. The independently developed human-machine interaction software features a popular design, making it simple and convenient to use.
Main Functions
- Six-position design, capable of testing up to six micro current transformers at once;
- Testing of basic error and composite error of micro current transformers at power frequency;
- Testing of error and composite error of micro current transformers under power frequency current superimposed with DC component;
- Testing of error and composite error of micro current transformers under sinusoidal half-wave;
- Harmonic influence testing of micro current transformers;
- Analysis of harmonic content and waveform distortion rate of the secondary output of micro current transformers, and testing of ratio error and phase error of each harmonic;
- Fully automatic testing according to the test plan, with automatic saving of test data;
- During automatic testing, automatic control of the electronic programmable AC/DC current source to output different calibration points and automatic control of the load box adjustment;
- Automatic generation of test reports, which can be edited according to user templates;
- The electronic programmable AC/DC current source can superimpose DC output on the fundamental wave and output sinusoidal half-wave.
Technical Specifications
| 1. Overall Specifications | |||||
| Calibrator Accuracy Class | Class 0.05; DC resistance class 0.1 | ||||
| Electronic Programmable AC/DC Current Source Accuracy | 0.01 | ||||
| Calibration Bench | Dimensions (L×D×H) | 2216mm×860mm×970mm | |||
| Weight | Approximately 80 kg | ||||
| Working Environment | Should have good ventilation conditions | ||||
| Ambient Temperature | -10℃ ~ 55℃ | ||||
| Ambient Relative Humidity | <85% (no condensation or corrosive gases) | ||||
| Power Supply | Please refer to the power supply specifications of each module | ||||
| 2. Micro Current Transformer Calibrator | |||||
| Standard Input Range | 10mA～100A | ||||
| Tested Input Range | 8μA～50mA | ||||
| Ratio Error Measurement Accuracy | 0.05% | ||||
| Phase Error Measurement Accuracy | 2′ (minutes) | ||||
| Measurement Frequency Range | 45Hz～65Hz | ||||
| DC Current Measurement Accuracy | 0.10% | ||||
| Power Supply | AC 220V±10% 50 Hz | ||||
| 3. Harmonic Measurement Accuracy | |||||
| Harmonic Order | 2~4th | 5~6th | 7~10th | 11~25th | 26~41st |
| Harmonic Ratio Error Measurement Accuracy (%) | 0.1 | 0.2 | 0.5 | 1 | 2 |
| Harmonic Phase Difference Measurement Accuracy (°) | 0.2 | 0.5 | 1 | 2 | 3 |
| 4. Electronic Programmable AC/DC Current Source | |||||
| Power Frequency Current Accuracy | 1% | ||||
| Frequency Output Range | 0~2050Hz | ||||
| Output Current Range (Power Frequency) | 0~100A | ||||
| Maximum Port Voltage Output | 3.7V | ||||
| Waveform Distortion (Power Frequency) | <1% | ||||
| Output Stability | Better than 0.2%/min | ||||
| Power Supply | AC 220V (±10%) (MAX 13A) | ||||
Product Document
File Name
Update Time
Related Products
XL-3600T3 DC Current Sensor Calibration Bench
XL-3610T3 Micro Current Transformer Calibration System
XL-3620T6 Wide Range Current Transformer Calibration System
XL-3600T6 Anti-DC Transformer Calibration System
XL-3600T12H High-Precision Current Sensor Calibration System
XL-3611 AC/DC Current Transformer and Sensor Testing Bench
Product Inquiry
Phone:18926763142/0755-86660346
Fax: 0755-26470506
Address: 6th Floor, Building A, Huizhi R&D Center, Bao'an District, Shenzhen, Guangdong Province
Alibaba Store:https://szxlele.1688.com/
Power Source Meter New Website:http://gly.xl-ele.com
Xinglong Testing Company Website:http://www.xljc-ltd.com
Scan to enter the mini program
Scan to follow the official account
Scan to follow the Sohu account
Scan to follow the Baijia account
Scan to follow the Douyin account