XL-8093U Network Configuration AC Sensor Calibrator

XL-8093U Network Configuration AC Sensor Calibrator

The XL-8093 distribution network AC sensor calibrator has an inherent accuracy of 0.05 level and can calibrate voltage sensors with small signal output types of 0.2 level and below.

Product Inquiry
Related Products

Product Description

Product Introduction

XL-8093U Distribution Network AC Sensor Calibration Instrument The core adopts a dual-CPU architecture with powerful functions, greatly expanding bandwidth with a 24Bit AD chip and 512 times oversampling technology, improving measurement accuracy. At the same time, multi-gear automatic switching and FIR filters are used to enhance dynamic range and signal-to-noise ratio. The operating software features a beautiful interface and is easy to use. The power supply and sampling input adopt extensive electromagnetic compatibility measures, capable of adapting to complex field testing environments. The portable design scheme facilitates laboratory and field testing. The XL-8093 distribution network AC sensor calibration instrument has an accuracy level of 0.05, capable of calibrating voltage sensors with small signal output types of level 0.2 and below.
 

Main Functions

  • Calibrate the ratio error and phase error of distribution network voltage sensors (EVT);
  • Display relevant information such as voltage and frequency of the current primary conductor to facilitate comprehensive evaluation of the calibrated parameters;
  • System reference standard: "T/JDG 018-2018 Technical Conditions for 10kV and 20kV AC Sensors in Distribution Networks";
  • Real-time display of the waveform of the sensor under calibration to monitor waveform distortion of the tested transformer;
  • Convenient recording of calibration point errors; clicking report generation saves the recorded error data for easy archiving or error analysis;
  • Portable design, small size and light weight, convenient for testing work, simple and convenient wiring;
  • This product has strong adaptability and scalability, supporting subsequent upgrades.

 

Technical Specifications

1. Calibration Instrument Technical Specifications
Standard Voltage Input Range 0～120V
Standard Voltage Measurement Range 20V～120V 0.05%RD 1V～20V 0.1%RD
Calibration Instrument Accuracy Level Level 0.05 (ratio error better than 0.05%, phase error better than 2′)
2. Small Signal Transformer Input Voltage (Tested Transformer)
Small Signal Transformer Input Voltage Range 0～7V
Output Accuracy 0.05%RD (200mV～7V)
Input Impedance of Tested Small Signal 200MΩ
3. Other Specifications
Operating Power Supply Voltage Range AC 220V±5% 50Hz
Power Consumption About 30VA
Operating Temperature -10℃～50℃
Relative Humidity ≤85% No corrosive gases
Dimensions (L×W×H) 488mm×268mm×199mm
Total Weight About 8kg

Product Document

File Name

Update Time

Related Products

XL-809RED Three-Phase Digital Comparative Transformer Calibrator

XL-809RED Three-Phase Digital Comparative Transformer Calibrator

The XL-809RED three-phase digital comparison transformer tester features a dual-CPU architecture core, offering powerful functionality. It utilizes a 24-bit AD chip and 512 times oversampling technology to greatly expand bandwidth and improve measurement accuracy.
XL-809E Digital Comparison Transformer Calibrator

XL-809E Digital Comparison Transformer Calibrator

The XL-809E digital comparative transformer tester is a transformer tester developed for the field of primary and secondary integrated transformer testing in distribution networks. Both the standard and the device under test support multiple types of input signals. It is not limited to testing secondary low-signal transformers but can also test traditional electromagnetic transformers. The testing items include ratio error, phase error, delay, polarity, and more.
XL-809 Electronic Transformer Calibrator

XL-809 Electronic Transformer Calibrator

The XL-809 electronic transformer tester (small signal input) is suitable for laboratory and on-site precision calibration of electronic transformers with small signal output that comply with IEC60044-7/8 standards. It has an accuracy level of 0.05 and can perform calibration of electronic transformers with small signal output types of 0.2S level and below.
XL-807H Power Frequency Harmonic Current Transformer Calibrator

XL-807H Power Frequency Harmonic Current Transformer Calibrator

The XL-807H power frequency harmonic transformer calibrator supports angle difference and ratio difference calibration for electronic transformers (small signal output) and electronic transformers (IEC61850-9-2/LE output).
XL-809RD Transformer Tester

XL-809RD Transformer Tester

The XL-809RD transformer tester is suitable for laboratory and on-site precision calibration of electronic sensors with small signal output conforming to IEC60044-7/8 standards and electronic sensors with digital (FT3) output. It has an accuracy level of 0.05 and can perform error verification for electronic sensors of 0.2S level and below.
XL-809RM Three-Phase AC Sensor Calibrator

XL-809RM Three-Phase AC Sensor Calibrator

The XL-809RM three-phase AC sensor calibrator is suitable for laboratory and field precision calibration of electronic transformers with small signal outputs. It has an accuracy level of 0.05 and can calibrate electronic transformers with small signal outputs of 0.2S level and below.
XL-809RE Three-Phase AC Sensor Calibrator

XL-809RE Three-Phase AC Sensor Calibrator

The XL-809RE three-phase AC sensor calibrator is suitable for laboratory and field accuracy calibration of electronic transformers with small signal outputs that comply with IEC60044-7/8 standards. It has an accuracy level of 0.05 and can calibrate electronic transformers with small signal output types of 0.2S level and below.
XL-8093I Network Configuration AC Sensor Calibrator

XL-8093I Network Configuration AC Sensor Calibrator

The XL-8093I network distribution AC sensor calibrator (current) has a self-accuracy of 0.05 level and can calibrate current sensors with small signal output types of 0.2 level and below. It features a portable design, convenient for laboratory and field testing.
XL-809R Network Configuration AC Sensor Calibrator

XL-809R Network Configuration AC Sensor Calibrator

The XL-809R network configuration AC sensor calibration instrument is suitable for laboratory and on-site accuracy calibration of electronic transformers with small signal output that comply with IEC60044-7/8 standards. It can perform calibration of electronic transformers with small signal output types of 0.2S grade and below.
XL-3270 Programmable Wideband Current Source

XL-3270 Programmable Wideband Current Source

The XL-3270 Programmable Wideband AC Source (hereinafter referred to as XL-3270) can output single-phase AC and DC current. The current output can be sine wave, superimposed DC, DC, half-wave, and various harmonic superpositions. The frequency output range is DC-1.2kHz, suitable for occasions requiring complex power waveform signal output.

Product Inquiry

Our staff will contact you within 24 hours (working days)
Submit

Phone:18926763142/0755-86660346
Fax: 0755-26470506
Address: 6th Floor, Building A, Huizhi R&D Center, Bao'an District, Shenzhen, Guangdong Province
Alibaba Store:https://szxlele.1688.com/
Power Source Meter New Website:http://gly.xl-ele.com
Xinglong Testing Company Website:http://www.xljc-ltd.com

Scan to enter the mini program

Scan to follow the official account

Scan to follow the Sohu account

Scan to follow the Baijia account

Scan to follow the Douyin account

300.cn

Shenzhen

SEO

Business License
%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home